Bug #2230

Vertex markers are displayed in Print Composer

Added by dr - over 3 years ago. Updated 2 months ago.

Status:Feedback Start Date:
Priority:Low Due date:
Assigned to:Marco Hugentobler % Done:

0%
Category:Printing
Target version:Version 2.0.0
Platform:All Patch supplied:No
Platform version: Affected version:master
Status info:0 Causes crash or corruption:No
Resolution:

Description

Vertex markers are displayed at Print Composer.

vertexes.jpg (97.3 kB) dr -, 12/09/2009 10:49 am

patch_for_bug__2230.diff (1.3 kB) sunilkcube -, 03/25/2011 03:54 am

patch_for_bug__2230.txt (1.3 kB) sunilkcube -, 03/25/2011 03:55 am

History

#1
Updated by Giovanni Manghi over 3 years ago

Just toggle editing off and then use the "update preview" in the composer. Not enough?

#2
Updated by dr - over 3 years ago

Replying to [comment:1 lutra]:

Just toggle editing off and then use the "update preview" in the composer. Not enough?
Of course, but it's not user friendly. I guess that Print Composer need to do it.

#3
Updated by Giovanni Manghi over 3 years ago

Replying to [comment:2 dr]:

I guess that Print Composer need to do it.

So, do you suggest the print composer to toggle editing off (with a warning? without?) if you are adding to the layout a map being edited?

I don't like the idea either, but it's just my opinion.

Nevertheless I see this more like a enhancement request or a minor bug, after all an there is an easy "workaround".

#4
Updated by dr - over 3 years ago

Replying to [comment:3 lutra]:

Replying to [comment:2 dr]:

I guess that Print Composer need to do it.

So, do you suggest the print composer to toggle editing off (with a warning? without?) if you are adding to the layout a map being edited?

I don't like the idea either, but it's just my opinion.

Nevertheless I see this more like a enhancement request or a minor bug, after all an there is an easy "workaround".
I think that Print Composer need to turn off displaying vertex markers only, not to toggle editing off.

#5
Updated by sunilkcube - about 2 years ago

  • Status changed from New to In Progress

#6
Updated by sunilkcube - about 2 years ago

Patch was added , Can anyone review and give comments here ?

#7
Updated by Marco Hugentobler about 2 years ago

  • Status changed from In Progress to New

#8
Updated by Marco Hugentobler about 2 years ago

  • Status changed from New to Closed
  • Resolution set to fixed

Applied in 3d9e4144 (SVN r15607). Thanks!

#9
Updated by dr - about 2 years ago

  • Status changed from Closed to Feedback
  • Resolution deleted (fixed)

In 3d9e4144 (SVN r15607) bug still present.

#10
Updated by Alexander Bruy about 2 years ago

Confirmed on Windows with QGIS 1.7 3d9e4144 (SVN r15607) from OSGeo4W. But on Linux with 35a5f55b (SVN r15608) all fine

#11
Updated by dr - about 2 years ago

Confirme bug in trunk 48900197 (SVN r15611) on Linux.

#12
Updated by Alexander Bruy about 2 years ago

Confirmed in 98d612f2 (SVN r15707) both Windows and Linux

#13
Updated by Alexander Bruy about 2 years ago

More info on this bug. If editing enabled before adding layers in Map Composer or in Overview Map then vertex markers are visible. But if I first add layer to the Overview Map or to Composer Map, and then enable editing - vertexes are not shown

#14
Updated by Alister Hood almost 2 years ago

Do you guys really still have this problem?
It works fine for me now (in trunk on Windows).

#15
Updated by Giovanni Manghi over 1 year ago

  • Target version changed from Version 1.7.0 to Version 1.7.4

#16
Updated by Giovanni Manghi over 1 year ago

  • Patch supplied set to No
  • Affected version set to master
  • Causes crash or corruption set to No

Alexander Bruy wrote:

But if I first add layer to the Overview Map or to Composer Map, and then enable editing - vertexes are not shown

But anyway when you will hit "update preview" in the compser the vertex markers will show.

Not sure what was the behavior before applying the patch, and what is the expected after applying it. Marco can you leave feedback?

#17
Updated by Paolo Cavallini about 1 year ago

  • Target version changed from Version 1.7.4 to Version 1.8.0

#18
Updated by Alister Hood 10 months ago

Alister Hood wrote:

Do you guys really still have this problem? It works fine for me now (in trunk on Windows).

Actually, no. It doesn't work fine for me on either Windows or Linux. But the problem is only with layers using new symbology.

#19
Updated by Paolo Cavallini 9 months ago

  • Target version changed from Version 1.8.0 to Version 2.0.0

#20
Updated by Patrick Dunford 4 months ago

Don't think much of the comment about toggling the layers out of edit mode.

I often have 10 or 12 layers in editing all at once. it is very slow to turn them all off just to do one little piece of a map, and then go through and turn them all back on to edit again. Considering that Qgis takes a few seconds to toggle the editing state of each layer and you have to do each one in turn.

#21
Updated by Antonio Locandro 2 months ago

Just had this problem yesterday on QGIS Master running on Ubuntu, took me at least an hour to figure out I had to toggle editing off. Although it could be seen as a minor problem this issue brings problems for me to suggest replacing other software with QGIS as other software have the ability to print without toggling editing.

Also available in: Atom PDF