Activity
From 03/18/2012 to 04/16/2012
04/16/2012
-
02:48 pm Bug #5268: mmqgis/create grid: wrong default parameters?
- It works fine here!
-
10:47 am Feature #5381 (New): Info panel or tab for user feedback
- Information not requiring immediate user interaction should not be displayed as pop-up (modal) dialogs, but in a sepa...
-
10:22 am Feature #5380 (Feedback): Automatic packaging of the plugin needed
- Already, some bugs seem to be reported because users are trying old revision.
We need more regular updates of the pa... -
- We honor modules tags like :
http://www.orfeo-toolbox.org/CookBook/CookBookch4.html#CookBookse17.html -
- Pointers to the http-accessible docs should be made available.
Like :
http://www.orfeo-toolbox.org/CookBook/CookB... -
- Works properly here (r106)!
What kind of input?, Any? -
- It seems fixed in revision 106!
Did you try with that? -
08:40 am Feature #5377 (New): Add tags
- Different backends call the same analysis in different ways, so it may be difficult for an user to find the right mod...
-
08:40 am Bug #5376 (Closed): python error when adding an input in the modeler
- Using sextante in a Windows Seven VM (linux host) and osgeo4w
When adding an input in the modeler I get
An erro... -
- testing on a Windows Seven VM (linux host) and osgeo4w
message is
Could not load layer: C:\Users\gio\sextante\t... -
07:57 am Bug #5360 (Resolved): GRASS modules fail
- there was a problem when passing the mapset parameter, which caused the GUI to appear. I fixed that (r104) and tested...
-
- This may happen also with other modules, not sure because I'm just starting testing.
When running r.to.vect using... -
-
-
- Added to history, results viewer and modeler (r101)
-
- patch comitted in version 101
-
- In current trunk (r100) the issue seems still persist!
the patch in attached! -
-
-
- It seems the problem is in SAGA, but I see that you are not entering eextent values, so the layer to create has 0 X 0...
-
-
- Fixed. It was, as mentioned, a typo in the exporting command, missing the opening quotation marks
-
- Fixed now. It uses now QSettings, so last used dir is kept between sessions
-
- Thanks Julien - now it works without errors, so "average" should be the default.
BTW, with the ortho.jpeg file you... -
04/15/2012
-
- It would be nice if in case of an error, the user could automatically send the log (by clicking on an OK button) to a...
-
- The patch attached seems to fix the issue!
-
- The otb behavior is that the "elev" parameter default to "average", but "dem" is the first choice in the list, and ha...
-
- The comboboxes are always initialized with the first element.
Should work as for booleans, with the possibility to... -
-
-
- On some window manager it is rather unpractical to close a window without a dedicated button
-
- Apparently, a DEM layer is mandatory for this analysis, but the interface doe not require it, thus the command fails,...
-
- Suggestion by Salvatore Larosa:
So, if you change in SagaAlgorithm.py (line 238) file:
from:
commands.append... -
- SAGA execution commands
libgeostatistics_kriging "Ordinary Kriging" -SHAPES "/home/paolo/Desktop/corso_qgis_grass/Da... -
- Currently, dialogs are very squeezed and miss a Close button, so they look different from the rest of QGIS. Please ma...
-
- In the interface, the Weight and parameters are mandatory; if no numeric field is selected, the module fails because ...
-
- In my case it does not:
- open a module (e.g., SAGA slope)
- select an output file for first output>default dir>c... -
- SAGA execution console output
_____________________________________________
##### ## ##### ##
### ##... -
-
-
-
-
-
- GRASS execution console output
Cleaning up temporary files ...
Starting GRASS ...
TERM environment variable not se... -
- ParameterNubmer|k|k|2|None|10
should be
ParameterNumber|k|k|2|None|10
Victor, I know you're gonna hate m... -
- Currently, the configuration files that describe algorithms options have unintelligible names. It would be much easie...
04/14/2012
-
- It would be useful if users could share their models. This could be implemented by adding a method to up and download...
-
- Link in the http://plugins.qgis.org/plugins/sextante/ page sends to a page with wrong bugtracker etc.
This can be mi... -
- Still to be set for OTB
-
-
-
01:47 am Bug #5299: Could not load layer after SAGA analyses
- Apparently there is an error in the "saga_batch_job.sh".
According to the log, the last entry is: /home/scubbx/sexta...
04/13/2012
-
09:32 am Bug #5351 (Closed): If you run a GRASS analysys, Sextante starts GRASS Gui
- Sextante starts GRASS GUI and then it stops.
If you close the interface the error is something like:
ERROR 4: `/hom... -
- Yes, just fixed. Thanks.
-
- It works for me after 1.0.3 update.
Ubuntu 11.10, current master. -
- It would be nice if at first startup the plugin would ask for all the necessary info for running modules, e.g.:
*... -
- First modules already added - thanks!
04/12/2012
-
- Fixed
Added an option to select the name to use when opening the layer -
-
- Fixed
04/06/2012
-
03:13 am Bug #5287: Output of SAGA modules: the "temporary" shapefile is automatically added but the "name...
- This problem doesnt exist, I didnt notice that the shapefile that was loaded into the project was in fact the "output...
-
- This appears to be fixed in 1.02, thanks.
04/04/2012
-
12:31 pm Bug #5312: Help menu in Mac OS X
- it is subprocess.Popen(['open',filename])
-
- the solution
@elif sys.platform == "darwin":
subprocess.call(('open', filename))@
works, but with a... -
- In MAC OS X, GRASS GIS is installed as an application bundle
!http://dl.dropbox.com/u/678636/grass_bundle.png!
Th...
04/03/2012
-
- After kriging, same error, but rasters are not produced.
-
- Traceback (most recent call last):
File "/home/paolo/.qgis/python/plugins/sextante/modeler/ModelerDialog.py", line... -
- After a SAGA analysis, I get:
Could not load layer: /home/paolo/sextante/tempdata/1333521339.4916.tif
In fact, ... -
- Upon starting a GRASS command, I get:
GRASS folder is not configured.
Please configure it before running GRASS al... -
- Duplicate
-
05:37 am Bug #5288 (Closed): SAGA - Windows XP - Documents and Settings path
- Hello,
I experimented that on Win XP the "Documents and Settings" default path for temporary dir
creates problem... -
- The should be only one output shapefile (the "named" shapefile) and this should be automatically added to the project...
-
- SAGA modules dont run if the selected shapefiles are stored in a folder whose "path" contains spaces. The following m...
04/02/2012
-
- Some of the ones I cannot find in Sextante:
* direct neighbours (3)
* cluster analysis for point clouds
...
Howev... -
- See the WPL client plugin
-
- See GDALTools plugin, in master
04/01/2012
-
- No need to set up in Linux. It assumes the software is correctly installed and its folder in PATH
-
- Feature added
Now it remembers last otput dir.
If it is the first time, it defaults to global output folder -
03/30/2012
-
- cannot replicate this error. Works fine once the previous bug was fixed. I cannot figure out how that invalid message...
-
- permission was set to execute only. Now it sets also read and write permissions
-
- Fixed. there was a method name mismatch in DummyInterface
-
- Typo is in SAGA itself
-
- Should read: threshold (in SAGA modules)
-
- Currently, Show help button does not return any page. Especially for complex analyses, manpages for individual module...
-
- The default parameters for the module appear wrong, as I get:
Invalid width / height: 100 / 100 -
- Traceback (most recent call last):
File "/home/paolo/.qgis/python/plugins/sextante/gui/ParametersDialog.py", line ... -
- On the other hand, Centroids work
-
- It would be good if all dialogs would remember last used dir for vectors, rasters, etc.
-
- Same for other fTools, e.g. line intersections
-
- Traceback (most recent call last):
File "/home/paolo/.qgis/python/plugins/sextante/gui/ParametersDialog.py", line ... -
- On Linux at least, adding the paths to SAGA, R, etc. executables should be unnecessary. It may be confusing and cumbe...
-
- Similar, for R:
Traceback (most recent call last):
File "/home/paolo/.qgis/python/plugins/sextante/gui/Paramete... -
- Running a command results in:
Traceback (most recent call last):
File "/home/paolo/.qgis/python/plugins/sextant...
Also available in: Atom